234776-M-SP Bearing 390x560x212mm

d1:135 mm; Mass shaft washer:0.64 kg; r1,2 min.:1.1 mm; d:90 mm; B:10.5 mm;

Grease Speed Rating n1:3000 rpm; d:70.000 mm; Basic Dynamic Radial Load Rating C:190000 N; Fillet Radius ra:2.00 mm; D:150.0000 mm; Fillet Radius rb:1.00 mm; B:70.00 mm; Oil Speed Rating n2:4000 rpm; Basic Static Radial Load Rating Co:186000 N;

Reference speed:6000 r/min; C:25 mm; Calculation factor e:0.4; Db min.:81 mm; d:45 mm; r3,4 min.:1.5 mm; rb max.:1.5 mm; Mass bearing:0.79 kg; a:21.715 mm; Limiting speed:7500 r/min;

End plug (suffix Y):EPR 14; Labyrinth ring:2 x LOR 111; Cap bolt:5/8-11 UNC; H1:133.35 mm; PG:1/4 NPT; ba:53.181 mm; Mass pillow block:62.6 kg; Stabilizing ring:SR-24-20; S:4.763 mm; Cap bolt, SAE grade:8;

Oil Speed Rating Open/Shielded n2:7500 rpm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:45700 N; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:32500 N; Accessories:Without Accessories; B:23.00 mm; Grease Speed Rating Open/Shielded n1:6200 rpm; d:30.000 mm;

End plug (suffix Y):EPR 13; Pa:17.3 kN; P60°:149 kN; P150°:50.7 kN; h:45.244 mm; Cap bolt recommended tightening torque:203.4 N·m; da:96.838 mm; Ca:62.789 mm; Stabilizing ring:SR-22-19; N1:22.225 mm;

P60°:423 kN; H:474.663 mm; A1:222.25 mm; Appropriate attachment bolt size G:1.5 in; End plug (suffix Y):X-5217-2; Cap bolt, SAE grade:5; RG:1 NPT; Housing:SAF 052 KA; Cap bolt recommended tightening torque:400 N·m; H2:95.25 mm;

D:200.0000 mm; Grease Speed Rating n1:3200 rpm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3800 rpm; Basic Dynamic Radial Load Rating C:138000 N; B:33.00 mm; d:130.000 mm; Basic Static Radial Load Rating Co:150000 N; Fillet Radius ra:2.00 mm;

Ew:24 mm; Limiting speed:22000 r/min; Mass needle roller and cage assembly:0.0065 kg; Basic static load rating C0:12.9 kN; Basic dynamic load rating C:8.58 kN; Fatigue load limit Pu:1.46 kN; U:10 mm; Reference speed:20000 r/min; Fw:20 mm;

D:170.0000 mm; Accessories:One Seal; Fillet Radius ra:2.00 mm; B:28.00 mm; Basic Static Radial Load Rating Co:73500 N; Grease Speed Rating Open/Shielded n1:3800 rpm; Oil Speed Rating Open/Shielded n2:4500 rpm; Basic Dynamic Radial Load Rating C:81800 N; d:110.000 mm; Sealed Speed Rating n3:2400 rpm;

Oil Speed Rating n2:6000 rpm; Basic Dynamic Radial Load Rating C:90400 N; D:130.0000 mm; Basic Static Radial Load Rating Co:64000 N; Fillet Radius ra:2.00 mm; B:31.00 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:4500 rpm; d:60.000 mm;

Oil Speed Rating n2:4300 rpm; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:95600 N; B:41.30 mm; Accessories:Shield & Seal; d:75.000 mm; Sealed Speed Rating n3:3200 rpm; D:130.0000 mm; Basic Static Radial Load Rating Co:88000 N; Fillet Radius ra:1.50 mm;

db:168.275 mm; Lock washer:W 30; A1:158.75 mm; P60°:394 kN; Cap bolt, SAE grade:8; Labyrinth ring (dc shaft position):LOR 134; A2:215.9 mm; P180°:162 kN; R2:39.688 mm; Da:269.999 mm;

Oil Speed Rating n2:1900 rpm; Basic Dynamic Radial Load Rating C:442000 N; Fillet Radius ra:3.00 mm; D:420.0000 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:1500 rpm; B:68.00 mm; d:230.000 mm; Basic Static Radial Load Rating Co:670000 N;

B2:30.5 mm; r3,4 min.:5 mm; d1 ≈:187.6 mm; Mass angle ring:2.58 kg; B1:17 mm; d:120 mm;